Dual Purpose 1 Hour Fire Rated Shallow Access Panel



Metal Faced Dual Purpose Shallow Access Panel with extending fixing tabs, 1 Hour fire rated, Metal Door, 25mm wide Picture Frame, Budget Lock, Single Door Unit, Powder Coated RAL 9010 30% Gloss. The 1st dimension stated is the hinge side.

This panel has a Fire Test Certificate up to 1200x600mm in a Wall application covered by Fire Certificate Number WF382113. 
This panel has a Fire Test Certificate up to 1200x600mm in a Ceiling application covered by Fire Certificate Number F15014. 
Anything above these sizes will be manufactured to the same construction as tested.

Minimum Size - 0100 x 0100mm

Maximum Size - 1200 x 0600mm

Make sure the structural opening is at least 7mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 607x607mm hole size. Remove the door from the frame and place the frame into the set hole. Fix through the appropriate fixing holes within the frame fold up ,xing tabs ensuring the frame is pushed up against the structural opening surround. Check the frame is square by measuring corner to corner. Refit door and lock in place; the door and frame should be flush. Independent bracing or support may be required to take the weight of the Access Panel.

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation