Dual Purpose None Fire Rated, Airtight Shallow Access Panel

R01-000-MD-PF-L11A-ATS

ENQUIRE NOW

Metal Faced Dual Purpose Shallow Access Panel with extending fixing tabs, Non fire rated, Metal Door, 25mm wide Picture Frame, Budget Lock, Single Door Unit, Airtight Panel, Slimfit depth frame, Powder Coated RAL 9010 30% Gloss. The 1st dimension stated is the hinge side.


This Panel was Air Pressure tested in accordance with EN 1634-3:2004 covered by Certificate Number P02023.

Minimum Size - 0100 x 0100mm

Maximum Size - 1200 x 0600mm

 

Make sure the structural opening is at least 7mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 607x607mm hole size. Remove the door from the frame and place the frame into the set hole. Fix through the appropriate fixing holes within the fold up fixing tabs ensuring the frame is pushed up against the structural opening surround. Check the frame is square by measuring corner to corner. Refit door and lock in place; the door and frame should be flush. Independent bracing or support may be required to take the weight of the Access Panel. Apply mastic on both faces of the frame, nominally 5mm wide sealing to the supporting construction.

BL Budget Lock
3 Way Lock
ATL KeyRetaining Lock
CTL Castellated Key Lock
EP 3 Point Euro Lock

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation