Fire Rated Electrical Box

R16-120-MD-PF-L11A-L33A

This Meter Over Box is designed to be surface mounted on to a structural membrane of a block wall system. It is manufactured with a 25mm wide picture frame. The panel has a Metal faced door. The panels door leaf is locked in place via a Budget Lock & 8mm Triangular Meter Cabinet Insert as standard other lock options are available upon request. The Panel is Powder Coated RAL 9010 30% Gloss. Other colours available upon request.

The Panel is 2 Hour Fire Rated for integrity up to 1070x650mm in a wall application tested in accordance with BSEN 1634-1.
The Panel is not acoustic rated.
The Panel is not Air Pressure tested.
The Panel is not Smoke Tested.

Dimensions
Fitting
Test Certificates
Data Sheets
Locks Available

Minimum Height 300mm Maximum Height 1070mm

Minimum Width 200mm Maximum Width 650mm

Make sure the structural opening is at least 5mm smaller than the panel size, back of frame opening size. E.G a 605x605mm panel size requires a 600x600mm hole size.

Remove the door from the frame and place the frame on top of the set hole. Fix through the appropriate fixing holes within the frame ensuring the frame is pushed up against the structural opening surround.

Check the frame is square by measuring corner to corner. ReAt door and lock in place; the door and frame should be flush. Independent bracing or support may be required to take the weight of the Access Panel. Apply Intumescent acrylic mastic on the rear of the frame, nominally 5mm wide sealing to the supporting construction.

Fire Certificate

Datasheet