FlipFix Plasterboard - 1 Hour Fire Rated

FF-060-PD-BF-BL

ENQUIRE NOW

Our FlipFix range launched in 2015, our unique fitting system has proved to be a market leader in the UK by reducing fitting times on site by as much as 80%

Dual Purpose, Plasterboard door Access Panel, fitted with unique Flipfix Fitting Device,  1 Hour Fire Rated, Beaded Frame, Single Door Unit, Budget Lock, Powdercoated Ral 9010 30% Gloss.1st dimension is the hinge side. This panel has a Fire Test Certificate up to 600x600 in a Ceiling & Wall application covered by Fire Certificate Number WF380206 to BS EN 1364-2:1999 and BS EN 1363-1:2012 

Patented FlipFix Device
Beaded Frame
Plasterboard face for a discreet finish

Stock Sizes                           Bespoke

0150 x 0150mm             Minimum Size - 0150 x 0150mm

0200 x 0200mm           Maximum Size - 0600 x 0600mm

0300 x 0300mm

0450 x 0450mm

0550 x 0550mm

0600 x 0300mm

0600 x 0600mm

 

Make sure the structural opening is at least 5mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 605x605mm hole size. You don't need to remove the door, just open the panel using the budget lock key provided, place the panel into the aperture. Tighten the FlipFix device via the fixing screw behind the door leaf to clamp on the back of the plasterboard (The FlipFix device covers boards from 8mm to 32mm) Check the frame is square by measuring corner to corner. Lock the door in place; the door and frame should be flush. Sit back and relax, you've just saved yourself 20 minutes. (Please note that it is important that prior to applying the plaster skim coat, a joint filler and a scrim tape is applied over the junction between the beaded frame and the plasterboard in order to prevent cracking of the skim coat)

BL Budget Lock
5MB 5mm Bit
CTL Castellated Key Lock

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation