FlipFix Tile Door - Non Fire Rated

FF-000-TD-BF-BL

ENQUIRE NOW

Our FlipFix range launched in 2015, our unique and patented fitting system has proved to be a market leader in the UK by reducing fitting times on site by as much as 80%

Ceramic Tile Lift Out Wall Access Panel, fitted with unique Flipfix Fitting Device with a Controlled Action device to stop the door falling away from the frame on opening, Non Fire Rated, Beaded Frame, Single Door Unit, Mini Touch Catch, Powder Coated RAL 9010 30% Gloss, the 1st dimension stated is where the locks are situated. This product is a lift out door and is hung on the Horizontal. For inspection purposes only

Patented FlipFix Device
Beaded Frame
Tiled Face, Discreet Finish

Bespoke

Minimum Size - 0200x0200

Maximum Size - 0600x0600

Make sure the structural opening is at least 7mm larger than the back of frame size, back of frame size. E.G a 600x600mm panel size requires a 605x605mm hole size. You don't need to remove the door, just open the panel, place the panel into the aperture. Tighten the FlipFix device via the fixing screw behind the door leaf to clamp on the back of the plasterboard (The FlipFix device covers boards from 8mm to 32mm) Check the frame is square by measuring corner to corner. Lock the door in place; the door and frame should be flush. Sit back and relax, you've just saved yourself 20 minutes. When tiling, ensure the tiles do not overhang the frame or door as this will cause damage to the tiles.

BL Budget Lock
5MB 5mm Bit
CTL Castellated Key Lock
TC Touch Catch

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation