Metal Faced Access Panel, suitable for Wall or Ceiling Application, Beaded Frame , Non Fire Rated, Single Door, Flush Lock, fitted with unique Flipfix Fitting Device, Powder Coated Ral 9010 30% Gloss.
Stock Sizes Bespoke
0150 x 0150mm Minimum Size - 0150 x 0150mm
0200 x 0200mm Maximum Size - 1200 x 0600mm
0300 x 0300mm
0450 x 0450mm
0550 x 0550mm
0600 x 0300mm
0600 x 0600mm
0900 x 0600mm
1200 x 0600mm
Make sure the structural opening is at least 5mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 605x605mm hole size. You don't need to remove the door, just open the panel using the budget lock key provided, place the panel into the aperture. Tighten the FlipFix device via the fixing screw behind the door leaf to clamp on the back of the plasterboard (The FlipFix device covers boards from 8mm to 32mm) Check the frame is square by measuring corner to corner. Lock the door in place; the door and frame should be flush. Sit back and relax, you've just saved yourself 20 minutes. (Please note that it is important that prior to applying the plaster skim coat, a joint filler and a scrim tape is applied over the junction between the beaded frame and the plasterboard in order to prevent cracking of the skim coat)
Flush Lock (Maximum Size 1200x600mm)
Budget Lock
5mm Bit
Key Retaining Lock
Suited Key Lock
Castellated Key Lock
Touch Catch
