Rapid Fit Plasterboard Riser Door - 2 Hours Fire Rated - Airtight - 30DB Acoustic

R53-120-PD-BF-L12A-ATN-30A

ENQUIRE NOW

Our unique Rapid Fit hinge system has revolutionised the riser door Access Panel by reducing door fitting times on site by as much as 30 minutes. Say goodbye to old Piano Hinge technology and say hello to future of riser doors Access Panels!

The Panel is 2 Hour Fire Rated for integrity up to 2400x900 in a Wall application tested in accordance with BS EN 1634-1: 2014 +A1: 2018 This panel is Acoustic Rated up to 30dB tested in accordance with BS EN ISO 10140-2:2010. This Panel is Air Pressure tested to Class 2 tested in accordance with BS EN 1026: 2016 This Panel is Smoke tested in accordance with BS EN 1634-3: 2004

Minimum Size   - 0300 x 0300mm

Maximum Size  - 2400x0900mm

 

Make sure the structural opening is at least 7mm larger than the back of frame size. E.G a 600x600mm panel size requires a 607x607mm hole size. Remove the door from the frame and place the frame into the set hole. Fix through the appropriate fixing holes within the frame ensuring the frame is pushed up against the structural opening surround. Check the frame is square by measuring corner to corner. Refit door and lock in place; the door and frame should be flush. Independent bracing or support may be required to take the weight of the Access Panel. (Please note that it is important that prior to applying the plaster skim coat, a joint filler and a scrim tape is applied over the junction between the beaded frame and the plasterboard in order to prevent cracking of the skim coat) Apply Intumescent acrylic mastic on both faces of the frame, nominally 5mm wide sealing to the supporting construction.

3 Way Lock
5MB 5mm Bit
ATL KeyRetaining Lock
EP 3 Point Euro Lock

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation