Riser Door - 90 Minutes Fire Rated - 33dB Acoustic

R57-090-MD-PF-L12A-33A (Also Available Beaded Frame)

ENQUIRE NOW

Our unique Rapid Fit hinge system has revolutionised the riser door Access Panel by reducing door fitting times on site by as much as 95%. Say goodbye to old Piano Hinge technology and say hello to future of riser doors Access Panels!

Wall Access Panel, Supplied with the Rapid Fit Hinge System, 90 Minute Fire Rated, Metal Faced Door, 25mm wide Picture Frame, 3 Point Locking System, Single Door Unit, 33 dB Acoustic Rated, Powder Coated RAL 9010 30% Gloss, the 1st dimension stated is the hinge side.


This panel has a Fire Test Certificate up to 1900x650mm in a Wall application tested in accordance with BSEN 1634-1: 2014. Anything above these sizes will be manufactured to the same construction as tested.


This Panel is Acoustic Rated up to 33dB tested in accordance with BS EN ISO 10140-2:2010.


This Panel is Smoke tested in accordance with BS EN 1634-3: 2004.

RapidFit Hinge System
90 Minutes Fire Rated
33dB Acoustic Rated

Bespoke

Minimum Size - 0300 x 0300mm

Maximum Size - 1900 x 0650mm

Make sure the structural opening is at least 7mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 607x607mm hole size. Remove the door from the frame and place the frame into the set hole. Fix through the appropriate fixing holes within the fold up fixing tabs ensuring the frame is pushed up against the structural opening surround. Check the frame is square by measuring corner to corner. Refit door and lock in place; the door and frame should be flush. Independent bracing or support may be required to take the weight of the Access Panel. Apply Intumescent acrylic mastic on both faces of the frame, nominally 5mm wide sealing to the supporting construction.

BL Budget Lock
3 Way Lock
Lockable Chrome Handle
5MB 5mm Bit
ATL KeyRetaining Lock
EP 3 Point Euro Lock
Chrome Handle

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation