Non Fire Rated - Loft Access Hatch Fitted with a Loft Ladder


Product Code: R12/000/MD/PF/L12A/LML

  • Metal Faced/Metal Door
  • Insulated Loft Hatch
  • Ceiling Access Panel
  • Non Fire Rated
  • 25mm wide Picture Frame
  • 3 Point Locking System
  • Single Door Unit
  • Fitted with a Loft Ladder
  • Number of Treads: 9no.
  • Height, floor to hatch: 2170mm – 2610mm.
  • Minimum Hatch Size: 550x720mm.
  • Powder Coated
  • Pure White Colour (RAL 9010)
  • 30% Gloss
  • First dimension, below, is the hinge side.


Minimum Size - 0550x0720mm

Maximum Size - 1000x1200mm

  1. Make sure the structural opening is at least 7mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 607x607mm hole size.
  2. Remove the door from the frame and place the frame into the set hole.
  3. Fix through the appropriate fixing holes within the frame ensuring the frame is pushed up against the structural opening surround.
  4. Check the frame is square by measuring corner to corner.
  5. Refit door and lock in place; the door and frame should be flush.
  6. Independent bracing or support may be required to take the weight of the Loft Hatch.
Budget Lock
3 Point Euro Lock
5mm Bit
Key Retaining Lock
Chrome Handle
Lockable Chrome Handle

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation