Flipfix Fitting Device
7th April 2022
You don't need to remove the door when fitting our famous Flipfix Access Panels, just open the panel using the budget lock key provided.
place the panel into the aperture. Tighten the FlipFix device via the fixing screw behind the door leaf to clamp on the back of the plasterboard...
(The FlipFix device covers boards f rom 8mm to 32mm)
Check the frame is square by measuring corner to corner. Lock the door in place; the door and f rame should be flush. Sit back and relax, you've just saved yourself 20 minutes.
Say hello to FlipFix and goodbye to timber bracing, screws and glue!
