Acoustic 90 Minute Fire Rated with Integrity & Insulation - Riser Door


Product Code: R02-E90-I90-MD-PF-L12A-48A

Metal Faced Wall Access Panel, 90 Minute fire rated for Integrity, 90 Minute Fire Rated for Insulation, Metal Door, 25mm wide Picture Frame, 3 Point Locking System, Single Door Unit, 48dB Acoustic Rated, Powder Coated RAL 9010 30% Gloss, the 1st dimension stated is the hinge side.


Minimum Size - 0400x0400mm

Maximum Size - 2400x0900mm


Make sure the structural opening is at least 10mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 610x610mm hole size. Remove the door f rom the f rame and place the frame into the set hole. Fix through the appropriate fixing holes ensuring the frame is pushed up against the structural opening surround. Check the frame is square by measuring corner to corner. Refit door and lock in place; the door and frame should be flush. Independent bracing or support may be required to take the weight of the Access Panel. Apply Intumescent acrylic mastic on both faces of the frame, nominally 5mm wide sealing to the supporting construction.

Budget Lock
3 Way Lock
5mm Bit
Key Retaining Lock
Castellated Key Lock

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation