Ceiling Access - 1 Hour Fire Rated - Loft Access Hatch

Metal Loft Hatch

Metal Faced Insulated Loft Hatch Ceiling Access Panel, 1 Hour fire rated, Metal Door, 25mm wide Picture Frame, 3 Point Locking System, Single Door Unit, Powder Coated RAL 9010 30% Gloss, the 1st dimension stated is the hinge side.

This panel has a Fire Test Certificate up to 575x740mm in a Ceiling application covered by Fire Certificate Number 221643 tested in accordance with BS 476: Part 22: 1987. Anything above these sizes will be manufactured to the same construction as tested.

THIS PRODUCT MUST BE INSTALLED INTO A VENTED ROOF SPACE

For Beaded Frame Option

Metal Faced Insulated Loft Hatch Ceiling Access Panel, 1 Hour fire rated, Metal Door, 25mm wide Beaded Frame, 3 Point Locking System, Single Door Unit, Powder Coated RAL 9010 30% Gloss, the 1st dimension stated is the hinge side.

THIS PRODUCT MUST BE INSTALLED INTO A VENTED ROOF SPACE

Dimensions
Fitting
Test Certificates
Data Sheets
Locks Available

Minimum Size - 0300 x 0450mm

Maximum Size - 1000x1000mm

THIS PRODUCT MUST BE INSTALLED INTO A VENTED ROOF SPACE

Make sure the structural opening is at least 7mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 607x607mm hole size.
Remove the door from the frame and place the frame into the set hole.
Fix through the appropriate fixing holes within the frame ensuring the frame is pushed up against the structural opening surround.
Check the frame is square by measuring corner to corner.
Refit door and lock in place; the door and frame should be flush.
Independent bracing or support may be required to take the weight of the Loft Hatch.
Apply Intumescent acrylic mastic on both faces of the frame, nominally 5mm wide sealing to the supporting construction.

Fire Tests - (r) ex12a.pdf

R12-060-MD-PF-L12A