Socials: Trustpilot: Leave us a review

Dual Purpose - 2 Hours Fire Rated - Beaded Frame

ENQUIRE NOW

For improved convenience, we have supplied our Dual-Purpose access panel with the patented FlipFix fitting device to allow for easy installation. The patented Flipfix Flush lock guarantees security but also allows for easy access. The metal door promises durability and resilience against impact and is accompanied with a beaded frame to make for a sophisticated look overall.

With a 2-hour fire rating, this access panel will protect your property from damage until the fire is safely handled if the situation should arise. The panel holds a Fire Certificate Number 434360 and has been tested in accordance with BSEN 1364-1:2014 for application in wall. It has a Fire Certificate Number 403834 tested in accordance with BSEN 1364-1: 2014 for ceiling application. It is important to note that Flipfix clamps must be used during installation in order for fire test requirements to be met.

If you would like more information on this product or our installation service, you can find our details on our contact page where you can also send us an enquiry.

Patented FlipFix Device
Beaded Frame
New Flush Bung Lock

Stock Sizes                           Bespoke

0150 x 0150mm             Minimum Size - 0150 x 0150mm

0200 x 0200mm             Maximum Size - 0600 x 0600mm

0450 x 0450mm

0550 x 0550mm

0600 x 0300mm

0600 x 0600mm

 

 

 

Make sure the structural opening is at least 5mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 605x605mm hole size. You don't need to remove the door, just open the panel using the budget lock key provided, place the panel into the aperture. Tighten the FlipFix device via the fixing screw behind the door leaf to clamp on the back of the plasterboard (The FlipFix device covers boards from 8mm to 32mm) Check the frame is square by measuring corner to corner. Lock the door in place; the door and frame should be flush. Sit back and relax, you've just saved yourself 20 minutes. (Please note that it is important that prior to applying the plaster skim coat, a joint filler and a scrim tape is applied over the junction between the beaded frame and the plasterboard in order to prevent cracking of the skim coat)

Flush Lock (Maximum Size 1200x600mm)
Budget Lock
5mm Bit
Key Retaining Lock
Castellated Key Lock

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation