Dual-purpose FlipFix Access Panel with a metal face, suited for harsh environments requiring extra reinforcement and durability. This access panel consists of a single door unit and is supplied with the patented FlipFix Fitting Device and flush lock. Access Panels come with RAL 9010 30% gloss powder coat. For inspection purposes only.
With picture as the frame type for this access panel, it can integrate with ease into existing interior design and preserve aesthetics where necessary, and allows for convenient access during maintenance and inspection and minimising the need for disruptive work.
Our Access Panels are also available in a range of fire-rating designs. Tested in accordance with BSEN 1364-1: 2014 + A1: 2018. From 30-minutes of fire resistance through to 4 hours integrity against fire. Take a look at our panel builder to see our full range.
.
Stock Sizes Bespoke
0150 x 0150mm Minimum Size - 0150 x 0150mm
0200 x 0200mm Maximum Size - 1200 x 0600mm
0300 x 0300mm
0450 x 0450mm
0550 x 0550mm
0600 x 0300mm
0600 x 0600mm
0900 x 0600mm
1200 x 0600mm
Begin by ensuring that the structural opening is at least 5mm larger than the panel size, which refers to the back of frame size. For instance, a panel size of 600x600mm requires a hole size of 605x605mm. There's no need to remove the door - instead, simply use the provided budget lock key to open the panel, then place the panel into the aperture.
Next, secure the FlipFix device using the fixing screw located behind the door leaf, which will clamp onto the back of the plasterboard. This device is versatile and works with board thicknesses ranging from 8mm to 32mm. To ensure that the frame is square, measure from corner to corner.
After confirming the frame is square, lock the door in place, making sure the door and frame are flush. Finally, sit back and enjoy your accomplishment - you've just saved yourself 20 minutes of work.
Flush Lock (Maximum Size 1200x600mm)
Budget Lock
5mm Bit
Key Retaining Lock
Castellated Key Lock
Touch Catch
