Socials: Trustpilot: Leave us a review

Dual Purpose - Non Fire Rated - Plasterboard

ENQUIRE NOW

Our plasterboard access panels are suited for spaces requiring some extra insulation and reduced noise transmission between spaces. Plasterboard is also a cheaper alternative to the metal and tile access panels that we supply. All of our products are trademarked FlipFix, which means sticking to your budget will never mean compromising on the quality of your access panel.

Dual-purpose with a beaded frame type, this access panel allows for easy integration in a professional working environment. The access panel comes supplied with the patented FlipFix Fitting Device, a powder coated RAL 9010 30% Gloss single door unit.

It is important to have considered the risk of fire when installing an access panel, especially where access to electrical and hazardous equipment is involved. In addition to our non-fire rated panels, we have a range of fire-rated access panels designed to provide between 30 minutes to 4 hours of protection against the effects of fire.  Take a look on our panel builder to see our full range.

Patented FlipFix Device
Beaded Frame
Plasterboard face for a discreet finish

Stock Sizes                           Bespoke

0150 x 0150mm             Minimum Size - 0150 x 0150mm

0200 x 0200mm             Maximum Size - 0600 x 0600mm

0300 x 0300mm

0450 x 0450mm

0550 x 0550mm

0600 x 0300mm

0600 x 0600mm

 

Make sure the structural opening is at least 5mm larger than the panel size, back of frame size. E.G a 600x600mm panel size requires a 605x605mm hole size. You don't need to remove the door, just open the panel using the budget lock key provided, place the panel into the aperture. Tighten the FlipFix device via the fixing screw behind the door leaf to clamp on the back of the plasterboard (The FlipFix device covers boards from 8mm to 32mm) Check the frame is square by measuring corner to corner. Lock the door in place; the door and frame should be flush. Sit back and relax, you've just saved yourself 20 minutes. (Please note that it is important that prior to applying the plaster skim coat, a joint filler and a scrim tape is applied over the junction between the beaded frame and the plasterboard in order to prevent cracking of the skim coat)

Budget Lock
5mm Bit
Suited Key Lock
Castellated Key Lock
Touch Catch

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation