Socials: Trustpilot: Leave us a review

Wall Access - 2 Hour - Electrical Box

ENQUIRE NOW

Electric box with Metal Door, designed for durability and high-impact resistance. With a 25mm Picture Frame, this product is not only functional but also aesthetically pleasing as it can easily fit in with existing interior design, and comes with a Powder Coated RAL 9010 finish at 30% gloss. The dimensions provided include a 5mm clearance to allow for a secure fit. The hinge side is indicated as the first dimension.

You can trust in the safety of our electrical box with a reliable budget lock and a 2-hour fire rating, making it the perfect fire-resistant solution for your electrical needs. This panel has a Fire Test Certificate up to 1070x650mm in a Wall application covered by Fire Certificate Number 435047 tested in accordance with BSEN 1634-1 from the meter side (Rear). Anything above these sizes will be manufactured to the same construction as tested.

This electrical box has a standard depth of 70mm with custom depths available upon customer request. If you would like to talk to a member of our team about specific requirements, get in touch on our contact page where you can also send us an enquiry.

Minimum Height 300mm       Maximum Height 1070mm

Minimum Width  200mm       Maximum Width   650mm

The Panel is 2 Hour Fire Rated for integrity up to 1070x650mm in a wall application tested in accordance with BSEN 1634-1.
The Panel is not acoustic rated.
The Panel is not Air Pressure tested.
The Panel is not Smoke Tested.

Make sure the structural opening is at least 5mm smaller than the panel size, back of frame opening size. E.G a 605x605mm panel size requires a 600x600mm hole size.

Remove the door from the frame and place the frame on top of the set hole. Fix through the appropriate fixing holes within the frame ensuring the frame is pushed up against the structural opening surround.

Check the frame is square by measuring corner to corner. ReAt door and lock in place; the door and frame should be flush. Independent bracing or support may be required to take the weight of the Access Panel. Apply Intumescent acrylic mastic on the rear of the frame, nominally 5mm wide sealing to the supporting construction. 

Budget Lock
3 Way Lock
3 Point Euro Lock
5mm Bit
Suited Key Lock
Castellated Key Lock
Touch Catch

FlipFix, the fastest way to install an Access Panel

With our unique Fitting Device, Mitreless Frame and new Flush Lock system. FlipFix Access Panels are 5 times quicker to fit compared to a traditional panel saving you 80% on fitting costs. No screws or glue required and no need for bracing or supports just cut, fit and flip!

Now With The New Flush Lock
Available In 1 & 2 Hour Fire Rating
Fastest Panel Installation