Dual Purpose Access Panel, Supplied with the Patented FlipFix Fitting Device, Non fire rated, Tiled-Door, Beaded Frame, Budget Lock, Single Door Unit, Powder Coated RAL 9010 30% Gloss, The 1st dimension stated is the hinge side. For inspection purposes only.
Patented FlipFix Device
Beaded Frame
Tiled Face, Discreet Finish
Bespoke
Minimum Size - 0200x0200
Maximum Size - 0600x0600
Make sure the structural opening is at least 7mm larger than the back of frame size, back of frame size. E.G a 600x600mm panel size requires a 605x605mm hole size. You don't need to remove the door, just open the panel, place the panel into the aperture. Tighten the FlipFix device via the fixing screw behind the door leaf to clamp on the back of the plasterboard (The FlipFix device covers boards from 8mm to 32mm) Check the frame is square by measuring corner to corner. Lock the door in place; the door and frame should be flush. Sit back and relax, you've just saved yourself 20 minutes. When tiling, ensure the tiles do not overhang the frame or door as this will cause damage to the tiles.
Budget Lock
5mm Bit
Castellated Key Lock
Touch Catch
